Phonic i7600 User Manual page 8

EQ/rTA switch and indicator
pressing the EQ/rTA button lets you switch
between the Eq Module and rta Module. the
accompanying green lED lights up when you are in
the rta Module.
Bypass switch and indicator
pressing the Bypass button lets you switch the
bypass function on or off. when a channel is
bypassed, as indicated by the accompanying red
lED, none of the Eq settings are applied to the input
signal of that channel. as a result, the signal you get
from the channel output is identical to the original
input signal. this feature lets you make a quick
comparison between the original and processed
sounds. it is particularly useful when you are setting
up your system.
notE: the Channel Link status affects the
behavior of the Bypass button. when Channel
Link is on, pressing the Bypass button affects the
bypass status of both channels. when Channel
Link is off, however, which channel will be affected
by the Bypass button is determined by the location
of the cursor (that is, the blinking lED in the Band
level Display, or the left-most blinking lED in a
multiband group). if the cursor is in the left pane,
pressing the Bypass button affects only the bypass
status of channel 1. likewise, if the cursor is on the
right pane, pressing the Bypass button affects only
the bypass status of channel 2.

GrAPHIC EDIT control
the behavior of this control knob depends on the
current control mode. generally, this knob adjusts
the band-specific settings. We will discuss this
control in greater detail later.
fuNCTION EDIT control
the behavior of this control knob also depends on
the current control mode. generally, this knob adjusts
the system-wide and channel-specific settings. We
will discuss this control in greater detail later.
i7600