Tilt to zoom: allows you to use the Tilt feature to reduce or enlarge the screen when
in Gallery or Browser. Tap Tilt to zoom, and then tap Sensitivity to adjust the tilt
sensitivity using the slider. Tap Test to run a test process of the selection or OK to
set the selection.
Pan to edit: allows you to move icons from one page to another in Home and
Application edit mode. Tap Pan to edit, and then tap Sensitivity to adjust the tilt
sensitivity using the slider. Tap Test to run a test process of the selection or OK to
set the selection.
Double tap: automatically prepares your phone for voice commands in Voice talk.
Tap the On/Off slider to activate the Double tap feature. The slider displays
when Double tap is activated.
Turn over to mute: allows you to mute incoming calls and sounds by turning your
phone over. Tap the On/Off slider to activate the Turn over to mute feature. The
slider displays
Developer Options Settings
You can set your own developer options through the Settings menu.
USB Debugging
Development Phone ID
Allowing Mock Locations
Desktop Backup Password
User Interface Options
Application Options
Accessing Developer Options
► Press
Important!
These features are used for development purposes only.
USB Debugging
When enabled, allows debugging when the phone is attached to a PC by a USB cable.
1. Press
2. Tap USB debugging to enable or disable the setting. When enabled, a check mark
appears in the check box.
Settings
when Turn over to mute is activated.
>
and tap Settings > Developer options.
>
and tap Settings > Developer options.
82