Set Up Speed Dialing - Samsung Galaxy S II User Manual

 Activate Speaker to route the phone's audio through the speaker. (You can adjust
the speaker volume using the volume buttons.)
 Deactivate Speaker to use the phone's earpiece.
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
●
Mute: Mute the microphone during an active call. Tap again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
● Bluetooth: Route the phone's audio through a connected Bluetooth headset (On) or
through the speaker (Off).

When the call is routed to a Bluetooth headset, the current call area shows the
Bluetooth call icon
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.

To route the current call back to the phone, tap Headset to temporarily use the
phone. Tap it again to route the call back to the connected Bluetooth headset.

When Bluetooth or the Bluetooth headset is turned off, the call is routed through
either the earpiece or speaker.
●
Press
select it.

Contacts: Display your contacts list.

Set Up Speed Dialing

Your phone can store up to nine phone numbers in speed dial locations.
Assign a Speed Number to a Contact
1. Press
2. Touch
3. Touch the list menu under Number to select a number from the contact to assign to
speed dial.
4. Touch the list menu under Location to assign the number to a speed dial location.
Phone Calls
.
during a call to display a list of additional in-call features. Tap an option to
> > Contacts. Touch an entry to select it.
> More > Set speed dial.
42