Table of Contents
Advertisement
User- Programmable Fea tures (Con tin ued)
Press the button on the remote to be programmed, you will hear one chirp.
NOTE 1:
n
Press the button again, you will hear two chirps.
NOTE 2:
When this feature is selected, siren sound 1 will play for five seconds. Press
n
marked to turn the siren sound off, press unmarked to activate the sound. Next, siren
sound 2 will play for five seconds. Press marked to turn the siren sound off, unmarked
to activate it. The system will cycle through all six siren sounds.
You will hear two chirps when all features are reset.
NOTE 3:
n
NOTE 4:
When you hear two chirps, all remote controls will have been erased from
n
the system memory. You must now add the new and/or existing remote controls to the
system (i.e., AutoProgram each remote that will be used with the ACE 2000).
Programs a remote control from any other Clifford system (that uses ACG 2
NOTE 5:
n
technology) to arm or disarm the vehicle. For instance, to set the button
combination of the other car's master remote control to arm/disarm the system, select
column 4, row 1, then transmit the
you are programming. The system will respond with one chirp. Immediately press the
button combination a second time. The system will respond with two chirps. The other
vehicle's remote will now arm/disarm the system by pressing the
simultaneously.
This feature can be controlled by a secondary remote or any remote control
NOTE 6:
n
of any other ACG-2 system, after that remote has been programmed to arm/disarm this
system. Select the row and column number, then transmit the unused button on the
other remote that you want to use to perform that function. The system will respond
with the same number of chirps as the row number. Please note that you must first set a
button on the remote that will arm/disarm the system (column 4, row 1) before these
others will be accepted.
+
button combination from the remote
16
+
and
buttons
Advertisement
Table of Contents
