Program Mode; Usb/Sd/Mmc-Card Playback - Hyundai H-1428 Instruction Manual

to skip to the next track. Press and hold this
button to search for a particular point at high
speed forward. Release the button to resume
normal playback.
• Press SKIP/SEARCH/PREVIOUS button
once to skip back to previous track. Press and
hold this button to search for a particular point
at high speed backward. Release the button
resume normal playback.
• If you use an MP3 disc containing folders,
you can select a folder. In stop mode, press
repeatedly FOLDER button. The number of
the current folder will be displayed. After you
selected a folder you can select tracks in the
current folder as described above.
Repeat mode
• Press MODE button once for single track
repeat playing.
• Press twice for all track repeat playing.
• If you use an MP3 disc containing folders,
press this button again to repeat all tracks in
the current folders.
• Press the button again for all track random
playing.
• To cancel repeat or random playback,
press MODE button again.

Program mode

Up to 20 tracks can be programmed for disc
play in any order or the same track can be
repeated up to 20 times.
• Before use, be sure to stop the CD by
pressing STOP button.
• Press PROGRAM button. The display will
show "P01" and "PROGRAM". This indicates
that the set is now in memory programming
mode, at the first memory position.
• If you use an MP3 disc, press FOLDER
button to select a folder. Select a desired track
by using SKIP/SEARCH/PREVIOUS and SKIP/
SEARCH/NEXT buttons.
• Press PROGRAM button again to confirm.
The set will advance to next memory position,
the display will show "P02". Repeat two steps
described above to enter additional memories
Instruction manual
into the program if necessary.
• After a maximum of 20 songs (or less)
have been selected as described above,
press PLAY/PAUSE button to start playing the
programmed tracks.
• The "PROGRAM" symbol will remain
to indicate that you have saved a program-
memory (sequence).
• To check the program you have stored,
stop playback, then press PROGRAM button
and SKIP/SEARCH/NEXT button to see the
number of the first programmed track. Repeat
the above operation to see all programmed
track numbers.
• The program memory will be cleared when
you press STOP button twice, open the disc
compartment door or turn off the disc player or
power supply.
Good quality sound is guaranteed only
when playing licensed MP3 discs.

USB/SD/MMC-card playback

• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 4 Gb.
• This unit is also equipped with an SD/
MMC card socket that can accept and play
MP3 files stored on standard SD cards up to
32 Gb.
• To use USB drives/SD/MMC cards for
MP3 playback, slide the function switch to CD
position. Insert the USB drive or SD/MMC card
into the appropriate socket and repeatedly
press CD/SD/USB button until the display
shows "USB" or "CARD" (depending on which
one is being used).
• All operations with files contained in USB/
SD/MMC are the same as operations with MP3
discs.
Always switch off the unit or change
mode to CD before removing a USB flash drive
or SD/MMC card, to prevent damage to your
USB device or memory card.
Note: Although this product is fully
compatible with USB 2.0 and SD/MMC card
5