Dehumidifying Operation - Hitachi RAC-10JH5 Instruction Manual

DEHUMIDIFYING OPERATION

Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
DEHUMIDIFYING FUNCTION
Dehumidifying takes place with a target temperature which is slightly lower than the room temperature
setting. (However, target temperature is 16°C for a temperature setting of 16°C.) If the room temperature
becomes lower than the target value, operation stops. If the room temperature becomes higher than the
target value, operation restarts.
The preset room temperature may not be reached depending on the number of people present in the
room conditions.
Press the MODE selector button so that the display
1
indicates (DEHUMIDIFY).
The fan speed is set at LOW.
Press (FAN SPEED) button to select SILENT or LOW fan
speed.
Set the desired room temperature with the ROOM
TEMPERATURE setting buttons (the display indicates the
setting).
2
The range of 20-26°C is recommended as the room
temperature for dehumidifying.
START Press the (START/STOP) button. Dehumidifying operation
STOP starts with a beep. Press the button again to stop operation.
As the settings are stored in the memory of the remote controller, you
only have to press the
– 15 –
(START/STOP) button next time.