Hitachi RAS-S10H2 Instruction Manual page 13

2 3
Set the
(TIME) button. the TIMER control button.
AM
PM
2
Set the turn-off time with
the TIMER control button.
PM
2
Set the turn-on time with
the TIMER control button.
AM
4
Set the turn-on time with
the TIMER control button.
PM
AM
The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button is order to use the same settings next time.
Set the current time with
PM
Example: The current time is 1:30p.m.
3
Point the signal window of the remote controller toward the indoor unit,
and press the
The (OFF) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
The setting of turn-off time is now complete.
3
Point the signal window of the remote controller toward the indoor unit,
and press the
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
5
Point the signal window of the remote controller toward the indoor unit,
and press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
4
Press the (TIME)
button again. The time
indication star ts lighting
instead of flashing.
PM
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
PM
Example: The device will turn off at 11:00 p.m.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on early so that the preset
temperature be almost reached at 7:00 a.m.
AM
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
PM
Example:
For heating, the device will turn off at 10:30 p.m.,
a n d t h e n t u r n o n e a r l y s o t h a t t h e p r e s e t
temperature be almost reached at 7:00 a.m.; for
cooling and dehumidifying, it will simply turned on
AM
at 7:00 a.m. The settings of the turn on/off times
are now complete.
– 13 –
The time indication will
disappear automatically in 10
seconds.
To check the current time
setting, press the (TIME)
button twice.
The setting of the current
time is now complete.
(RESERVED)
(RESERVED)
(RESERVED)