Ec-Declaration Of Conformity - Jonsered FC2255 Operator's Manual

Approved accessories
Centre hole in blades/cutters, Ø 25,4 mm Output shaft thread M12
Grass blade/grass cutter
Saw blade
Trimmer head
Shredder blade
Support cup
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Jonsered BC
2255, MC 2255, FC 2255 and FC 2255 W with serial numbers dating from 2009 onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN ISO 12100-2/A1:2009, CISPR 12:2005, EN ISO 11806:2008
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered: SEC/09/2192, 01/164/063 - FC 2255, FC 2255
W, SEC/09/2191, 01/164/060, 01/164/064 - BC 2255, MC2255
Huskvarna December 29, 2009
Bo Jonsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
38 – English
TECHNICAL DATA
Type
Multi 275-4 (Ø 275 4 teeth)
Multi 300-3 (Ø 300 3 teeth)
Multi 350-3 (Ø 350 3 teeth)
Maxi 225-24 (Ø 225 24 teeth)
Scarlet 200-22 (Ø 200 22 teeth)
Scarlet 225-24 (Ø 225 24 teeth)
Trimmy S II (Ø 2.4 - 3.3 mm cord)
Tap-N-Go 45 Spin (Ø 2.7 - 3.3 mm cord)
Tap-N-Go 55 Spin (Ø 2.7 - 3.3 mm cord)
F55 (Ø 2.7 - 3.5 mm cord)
-
Fixed
With ball bearing
Cutting attachment guard,
Art. no.
544 16 03-02
544 16 03-02
544 16 03-02
544 01 65-01
537 21 71-01
544 01 65-01
544 10 74-04
544 10 74-04
544 10 74-04
544 10 74-04
544 02 65-03