Front Panel / Rear Panel; Mic Input - Yamaha MS101 III Owner's Manual

Monitor speaker
Hide thumbs Also See for MS101 III:
Table of Contents

Advertisement

Front Panel / Rear Panel

POWER/ON
LOW
-10
+10
MONITOR SPEAKER MS1013
1
2
1
POWER/ON switch/indicator
Press this switch to switch the power between on and
off. When the power is turned on, the POWER/ON indi-
cator comes on.
2
LOW control
Turn this control clockwise to boost low frequencies
and counterclockwise to reduce them.
HIGH control
3
Turn this control clockwise to boost high frequencies
and counterclockwise to reduce them.
4
VOLUME control
Use this control to set the volume level.
5

MIC INPUT

A dynamic type microphone can be connected to this
1/4 inch phone jack.
HIGH
VOLUME
MIC
INPUT
-10
+10
MIN
MAX
3
4
5
6
LINE 1
INPUT
7
8
6
Line 1 Input
The line level output from a CD player or VCR can be
connected to this RCA pin jack.
7
Line 2 Input
Any audio equipment that produces a line level output
can be connected to this 1/4 inch phone jack, i.e., syn-
thesizer, mixer, multitrack recorder, effects unit, etc.
8
Line Out
A multitrack recorder can be connected to this 1/4 inch
phone jack for recording. Input signals from the Mic,
Line 1, and Line 2 inputs are mixed, then output here.
Another MS101III can be connected to this jack for par-
allel operation. The front panel volume knob doesn't
effect the volume level of this line out.
5
LINE 2
LINE OUT

Advertisement

Table of Contents
loading

Table of Contents