Front Panel / Rear Panel - Yamaha MS101 III Owner's Manual

4 inch full-range speaker
Hide thumbs Also See for MS101 III:
Table of Contents

Advertisement

Front Panel / Rear Panel

STANDBY/ON
LOW
-10
+10
MONITOR SPEAKER MS1013
1
2
1
STANDBY/ON switch/indicator
Press this switch to switch the power between
STANDBY and ON. When the power is turned on, the
STANDBY/ON indicator comes on.
CAUTION:
A small amount of electric current is flowing even when the
power is in the STANDBY mode. When not using the MS101III
for an extended period of time, be sure to discon-nect the
power cord from the AC outlet.
2
LOW control
Turn this control clockwise to boost low frequencies
and counterclockwise to reduce them.
3
HIGH control
Turn this control clockwise to boost high frequencies
and counterclockwise to reduce them.
4
VOLUME control
Use this control to set the volume level.
5
MIC INPUT
A dynamic type microphone can be connected to this
1/4 inch phone jack.
HIGH
VOLUME
MIC
INPUT
-10
+10
MIN
MAX
3
4
5
6
LINE 1
INPUT
7
8
6
Line 1 Input
The line level output from a CD player or VCR can be
connected to this RCA pin jack.
7
Line 2 Input
Any audio equipment that produces a line level output
can be connected to this 1/4 inch phone jack, i.e., syn-
thesizer, mixer, multitrack recorder, effects unit, etc.
8
Line Out
A multitrack recorder can be connected to this 1/4 inch
phone jack for recording. Input signals from the Mic,
Line 1, and Line 2 inputs are mixed, then output here.
Another MS101III can be connected to this jack for par-
allel operation. The front panel volume knob doesn't
effect the volume level of this line out.
5
LINE 2
LINE OUT

Advertisement

Table of Contents
loading

Table of Contents