INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a mild
detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with
the
manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring
pads/cloths should not be used on the
cavity surface.
• NOTE: The manufacturers of this appli-
ance will accept no responsibility for
damage caused by chemical or abra-
sive cleaning.
Attention: Do not store flamma-
ble material in the oven.
ASSEMBLY AND DISMAN-
TLING OF THE SIDE RUN-
NER FRAMES
– Fit the side runner frames into the
– Slide the tray and rack into the run-
– To dismantle, operate in reverse
Fig. 8.8
holes on the side walls inside the
oven (Fig. 8.8).
ners (Fig. 8.9).
The shelf must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven.
order.
Fig. 8.9
29