Table of Contents
Advertisement
Digital Multiplexer
REAR PANEL
A. CAMERA INPUT / LOOP THROUGH OUT
Up to 9 camera signals can be input.When transmitting camera signals to external devices, OUT terminal can be
used.
B. ALARM IN / ALARM OUT / VTI TERMINAL
-VTI: TRIGGER Output Connection terminal of VCR
-ALARM IN: Up to 9 ALARM Sensors can be connected. "G" indicates grounding terminal connected
-ALARM OUT (HOT/COLD): When ALARM is activated, ACTIVE MAKE Signal is generated.
-ALARM RESET : Connected to RESET terminal of VCR, and when ALARM is deactivated, PULSE
C. VCR IN/OUT (BNC)
Indicates terminal for connecting to VCR Input/Output.
D. MONITOR OUT (BNC)
Indicates terminal for connecting to Monitor's video Input terminal.
E. SPOT OUT (BNC)
Indicates terminal for connecting to Monitor's video Input terminal.
F. VCR IN/OUT (4PIN MINI DIN)
Indicates terminal for connecting to VCR's S-VHS Input/Output terminal.
G. MONITOR OUT (4PIN MINI DIN)
Indicates terminal for connecting to Monitor's video S-VHS Input terminal.
H. RS-232C
With RS-232C cable, Remote Control can be done.
J. ~AC IN
Connects to Power Cord.
A
to ALARM Input, and should be connected to grounding terminal of sensors.
is generated.
SDM-090M/SDM-090MP:Not used.
SDM-090M/SDM-090MP:Not used.
D
C
E
F
G
B
1-4
G
H
I
Advertisement
Table of Contents
