Table of Contents
Advertisement
Digital Multiplexer
- The following is displayed if pressing the "ENTER" button with the blinking position placed at the "SPOT OUT...":
¥ You can set the sequence time of SPOT output.
¥ The blinking indication moves if pressing "
¥ The setting value is changed if pressing "
¥ The changed setting value is stored if pressing the "SET" button and you can return to the "MON OUT SET" menu.
- The following is displayed if pressing the "ENTENR" button with the blinking position placed at "SEQUENCE....":
¥ Set the indication time (second) of each channel in the automatic conversion mode.
¥ The blinking indication moves if pressing "
¥ The setting value is changed if pressing "
¥ The changed setting value is stored if pressing the "SET" button and you can return to the "MON OUT SET" menu.
[SPOT OUT]
CH1 : 02
CH3 : 00
CH5 : 00
CH7 : 00
CH9 : 00
ALARM S/W TIME : 02
CH1~CH9 : 0 to 30 seconds.
Alarm S/W TIME : 01 to 30 seconds.
The channel of LOSS or " 0 " of sequence time will be skipped in the SPOT output sequence.
SPOT OUTPUT on alarm
When the alarm is activated, only the alarmed channel will be output.
On single alarm : output only the alarmed channel.
On multiple alarms : output alarmed channels in turn at intervals of set ALARM S/W TIME.
(Even the sequence time of the alarmed channel is set as " 0 " then will be SPOT output.)
[SEQUENCE]
CH1 : 02
CH3 : 02
CH5 : 02
CH7 : 02
CH9 : 02
CH1 ~ CH9 : 0 ~ 30
"0" is skipped irrespective of existence of channel loss in the automatic conversion mode.
CH2 : 00
CH4 : 00
CH6 : 00
CH8 : 00
", "
" button.
", "
" button.
CH2 : 02
CH4 : 02
CH6 : 02
CH8 : 02
", "
" button.
", "
" button.
5-4
Advertisement
Table of Contents
