Table of Contents
Advertisement
Digital Multiplexer
E. SETUP/FUNCTION
F. MOVE ( , , , )
- MENU
Pressing this Button will make LED lit, and MAIN MENU appears on the screen.
- ENTER
Used when switching from MAIN MENU to SUB MENU.
- SET
This function is used when moving from SUB MENU to MAIN MENU after setting programs on
each MENU screen, or is used when setting each channel for multi-screen. When setting channels
for multi-screen, the channel number flashes.
- SEQUENCE
When pressing this Button, each Channel will automatically be switched to the next channel
sequentially with some time intervals, and LED should illuminate. Pressing again will stop illuminat-
ing, and stops sequencing.
- FREEZE
When pressing this Button, selected screen becomes still, and LED should illuminate.
- ZOOM
When pressing this Button, the screen should enlarge. Pressing once enlarges twice, and another
pressing enlarges 4 times, and pressing once again will bring the screen back to normal.
This function is used when setting Program Menu, Channel of Multi-screen, and Zoom Mode, and
also when moving Cursor.
1-3
Advertisement
Table of Contents
