Page 4
USER'S GUIDE V0.1 OSD User's Guide 2010/9/27 OSD Interface (a) Item Name : Select Items by using UP & DOWN button (b) Selection Function : Select Function by using LEFT & RIGHt button (c) Adjustable Function : Functions with arrow sumbol, press ENTER button to enter branch menu (e) Next page : Press Enter to enter OSD menu page 2 (This OSD menu has total of 2 pages)
USER'S GUIDE V0.1 OSD User's Guide 2010/9/27 OSD MENU LENS Manual Lens & Auto Iris Lens Setting Shutter speed & AGC setting, it determines the SHUTTER / AGC image brightness under low lux or bright condition White balance mode setting, it determines the WHITE BAL way the color is produced BACKLIGHT...
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 LENS Basic setting for lens, it covers normal lens & auto iris lens. 1. MANUAL This function is for normal lens or vari-focal lens. 2. AUTO This function is for auto iris lens, system automatically adjusts the iris level to control the brightness.
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 SHUTTER / AGC This function controls the shutter speed & AGC. AGC can automatic adjust the output signal level during the low lux condition.
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 WHITE BAL White balance is the process of removing unrealistic color with according to the light sources & temperature, so that objects appear white in person are rendered white on final output to TV.
Page 10
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 1. ANTI CR Color Rolling suppress 2. MANUAL Manually adjust the white balance Option Content Description Manually adjust the white balance , default is 44 , LEVEL 19-44 19 for low temperature 44 for high temperature LEVEL: 32 (Left)LEVEL: 19 (Right)LEVEL: 44...
Page 11
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 4. ATW Auto Trace White Option Content Description Setting for ATW response time, default is 239, SPEED 0-255 0 for slowest delay & 255 for fastest Setting for ATW delay time ,default is 16, DELAY CNT 0-255 0 for shortest delay &...
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 BACKLIGHT This function is used when object is heavily influenced by the excessive front light or back light source. (1) OFF (DEFAULT) (2) BLC : Back light compensation (3) HLC : High light compensation Turns the excessive white light into black, it is mainly used for recognization of the car plate during the night.When excessive light source is behind the object.
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 ATR(Adaptive tone Reproduction)--WDR Function This function is to softwarely achieve Wide dynamic range, when this function is ON, the brightness of the darker region will be slightly brighter, and same for the brighter region, the brightness will be slightly darker 1.
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 MOTION DET This function detects the object movement (CCTV must be static). The detection frame blinks when object movement is detected. GPIO 1 of the module will output alarm signal (3.3V) when movement is detected.
Page 18
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 1. OFF 2. ON Option Content Description Motion detection sensitivity , default : 115 , DETECT SENSE 0-255 0 for lowest sensitivity, 255 for highest sensitivity. • OFF Display the motion detect grid, BLOCK DISP •...
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 DAY / NIGHT Setting for the DAY/NIGHT or COLOR/BW mode. When system switch to BW mode, GPIO 0 of the module will output a 3.3V signal. Normally it outputs 0V. 1.
Page 24
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 Noise reduction function minimises the level of noise. Noise refers to the random white or color pixels. Option Content Description • Y/C • OFF NR MODE noise reduction mode adjustment •...
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 CAMERA ID This function allows user to input their desired text and which will be shown on the screen 2 rows & 26 characters are availables, characters including 26 alphabets & numbers & symbols 1.
USER'S GUIDE SW-200_201 V0.1 OSD User's Guide OSD User's Guide 2010/9/27 LANGUAGE 8 OSD language are available 1. Japanese 2. German 3. French 4. Russian 5. Portuguese 6. Spanish 7. Simplified Chinese 8. English CAMERA RESET Return all the OSD settings to factory default (SAVE ALL must be applied in order to keep the settings after power ON/OFF)