Assembly Steps - PlayActive B28 Owner's Manual

Assembly Steps

• Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
• Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
• Assembly tool for need: screwdriver(
1
Ø3.5x12 screws
2
not included)
Side support
Rear axle
Ø12 Washer
Rear axle
and spanner.
● Fit the side support to the vehicle
body.
(NOTE: If the side support does not
seem to fit, change the other one and
try again! )
● Insert five Ø3.5x12 screws and
tighten with a screwdriver.
● Repeat for the other side.
● Turn the vehicle body downside
up.
Remove all the parts from the rear axle.
●
Slide a Ø12 washer onto the rear axle
●
from the longer end.
Insert the rear axle through the hole in
●
vehicle body.
● Turn the vehicle body downside up.
Remove all the parts from the rear axle.
●
Insert the rear axle through the hole in the
●
vehicle body.
2WD