Operating Instructions - Gateway FPD1830 Service Manual

FRONT VIEW
OSD Button
1. Power ON/OFF Button
Use this button to turn the monitor on or off.
2. Power Indicator
This indicator lights up green when the monitor
operates normally; in DPMS (Energy Saving)
mode, - stand-by, suspend, or power off mode - its
color changes to amber.
3. Button
Use these buttons to choose or adjust items in the on screen
display.

OPERATING INSTRUCTIONS

OSD AUTO SOURCE/SET
Power Indicator
Power Button
SOURCE/SET Button
Buttons
Front Control Panel
OSD AUTO
5
3
REAR VIEW
Power Connecter
SOURCE/SET
4
4. SOURCE/SET Button
Use this button to make Dsub or DVI connector active.
This feature is used when two computers are connected to
the monitor. The default setting is Dsub.
Use this button to enter a selection in the on screen display.
5. OSD Button
Use this button to enter or exit the on screen display.
- 5 -
D-Sub Signal
DVI-D Signal
Connector
Connector
1 2