Option Mode - Toshiba AW-B1100GM User Manual

If you wish to turn off the end buzzer sound
•
You can turn off the buzzer sound by
Press and hold
If you wish to change the shower rinse to the static rinse
For the shower rinse, it needs twice for the process. But for the
static rinse, it needs only once.
If you feel the amount of water is less or much
Water level is automatically set
to suit the amount of laundry. If
you feel the amount of water is
less or much, you can adjust it
as the following.
12

OPTION MODE

Press
Press
Press and hold for 3 seconds
If you feel the amount of water is much.
Turn the POWER
Adjust by pressing .
Press twice. Press once.
[Decrease approx. 10L] [Decrease approx. 5L]
(77L) 79L
(77L) 79L
(21L) 21L
(21L) 21L
Turn the POWER
* Set it once, it is written in memory. You don't have to set it on each laundry.
1
Press the button and hold. Then press the
POWER button. After buzzer beeps 3 times,
the end buzzer disabled.
2
Follow this instruction when you want to reset to
enable the buzzer.
* After you set the buzzer, the washer will keep the
setting in memory. So it is not necessary to reset
the buzzer every time.
1
Press button to turn on the washer.
2
Press the button and hold for 3 seconds.
The buzzer sound will be heard and the course
will be set within 5 seconds. After that, turn off the
washer.
•
Follow this instruction for the shower rinse, and
the buzzer sound will be heard.
•
After the setting, the washer will keep the
setting in memory. So it is not necessary to
reset every time.
The contents in ( ) also apply to AW-B1000G.
If you feel the amount of water is less.
with pressing the button.
Adjust by pressing
Press once.
[Increase approx. 5L]
(77L) 79L
(77L) 79L
(21L) 21L
(21L) 21L
. [Finished adjusting]
.
Press twice.
[Increase approx. 10L]
(77L) 79L
(21L) 21L