Built-In Safety Features / Parts & Accessories - Power Cooker PC-WAL1 Owner's Manual

Built-In Safety features
1. Lid Safety Device: Prevents pressure build-
up if lid is not closed properly and prevents lid
from opening until all pressure is released.
2. pressure and temperature Sensor Controls:
Maintain even
automatically activating or deactivating the
power supply.
3. "Back-up" Safety Release Valve: Should
the Temperature/Pressure
malfunction, causing
beyond maximum setting, the "Back-Up" will
automatically "kick in" and release the built
up pressure.
4. "Clog Resistant" Feature: Prevents food from
blocking the steam release port.
Lid
Rubber Gasket
(under LId)
AC Cord
IMPORTANT: Your Power Cooker
carefully before use. If any part is missing or damaged do not use this product and contact shipper using the
customer service number located on page 12 of the owner's manual.
heat and pressure
Sensor device
pressure to
pOWER COOKER pARtS & ACCESSORIES
has been shipped with the components shown above. Check everything
TM
5. "Spring-Loaded" Safety pressure Release:
Should all safety features listed above fail, this
"spring-loaded" device located beneath the
heating element will automatically lower the
Inner Pot, causing it to separate automatically
by
from the Rubber Gasket (fig. 1, page 6). This will
enable the steam and pressure to automatically
escape around the pot Lid, avoiding a
dangerous situation.
6. temperature"Cut-Off" Device: Should the
build
unit malfunction and cause the internal
temperature to rise beyond the "Safe" limit,
this device will cut-off the power supply and
will not automatically reset.
pressure
Valve
Rapid
Release
Button
Inner pot
LED
Control
panel
Base
Accessories
Measuring Cup
Ladle
Condensation
Collector
Steamer tray
5