Advertisement
A = DC POWER SWITCH - This is your On/Off switch for which to operate the generator.
B = ELAPSED TIME METER. This meter displays a continuous running
total of the hours accumulated on the unit.
C = AC VOLTMETER. This voltmeter displays the voltage level being produced by the
generator set.
D = CIRCUIT BREAKER. This circuit breaker provides overload protection for the
generator set. When tripped, the circuit breaker will switch to the "Off" position.
E = NEMA L530R RECEPTACLE. This is a twist-lock style receptacle rated for 125 VAC,
30 Amps.
F = CSA approved GFCI DUPLEX RECEPTACLE. This is a ground fault circuit interrupter
duplex rated at 250 VAC, 20 Amps. This receptacle must be tested on a regular
basis (monthly).
CONTROL PANEL
For K3000
- 14 -
Hide quick links:
Advertisement
