Using This Unit - Panasonic SC-HTB20 Owner's Manual

Using this unit

Preparation
≥ Turn on the TV.
Press [Í] to turn on the system.
Select the source.
Press To select
[TV] "TV"
[BD/DVD] "BD/DVD"
[AUX] "AUX"
≥ This remote control cannot be used to control the operations
of the connected devices.
∫ When "BD/DVD" or "AUX" is selected
as the source
On the connected device:
Select the TV's input for this unit and start the playback on
the connected device.
If the system does not operate as expected, such as sound defects, return the settings to the
factory preset and operate the system again. (
∫ To mute the sound
Press [MUTE].
The audio format indicators
blink simultaneously while
muting.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if this system is turned off.
( 6)
Press [i VOL j] to adjust the
volume of the speakers.
≥ Volume range: 1 to 100
Press [i SUBWOOFER j] to
adjust the subwoofer level
(bass sound).
≥ Subwoofer levels: 1 to 4
1 Press [i SUBWOOFER j] to display the
current level.
2 While the level is displayed:
Press [i SUBWOOFER j] to adjust the level.
Indication
§ The audio format indicators blink from left to right (i) or
from right to left (s) while adjusting the speaker volume or
the subwoofer level.The indicators will not blink when it has
reached the maximum or minimum.
26)
≥ If there is sound from the TV's speakers too, then use the
TV's remote control to lower the volume to minimum.
≥ The maximum volume of the TV and this system may be different.
≥ If this system is turned off with the volume setting in the
greater half (above 50), this system will automatically lower
the volume to the middle (50) when the system is turned on.
(Refer to page 26 to turn this function off.)
§
(Factory preset: 3)
§
Effect level
4 Highest
3
2
1 Lowest
21
VQT4D53