Table of Contents
Advertisement
SPECIAL FEATURES
AUTOMATIC STOP
During playback or recording, the unit will shut itself off automatically at the end of tape.
AUTOMATIC LEVEL CONTROL (ALC)
The unit incorporates with built-in ALC circuitry which automatically adjust the optimum recording level without overloading during recording or
dubbing.
TROUBLESHOOTING
Carefully re-read the instructions to make sure the unit is being operated properly.
Check the following before you take your unit to the local dealer for repair.
SYMPTOM
There is no sound from the speakers.
The radio does not work
There is excessive static during FM reception.
A cassette cannot be inserted into the compartment.
The PLAY button does not lock in position after inserting cassette
tape
The RECORD button cannot be pressed down with a cassette tape
inside.
The TAPE does not play
The sound is weak or distorted during tape playback.
A previous recording cannot be completely erased.
If you find the unit is not working properly after checking the above chart, please take it to your nearest Services Center. Do not attempt to
repair it by yourself. Refer all servicing to qualified service personnel. If necessary, clean the unit with a piece of cloth dampened with water
only. Make sure the unit is disconnected from an AC power outlet.
CAUSE
- Headphones are connected to the unit.
- The Volume control is set too low.
The FUNCTION switch is in the TAPE position
The antenna is not properly positioned
The tape is inserted in the wrong direction.
The tape is at its end and auto-stop function is in operation.
A tape with its safety tab removed has been inserted.
The PAUSE button is depressed.
The record/playback head is dirty.
The erase head is dirty.
8
Advertisement
Table of Contents
