Main Display And Functions; Settings; Troubleshooting; Wheel Size Sheet - Cannondale 2012 IQ200 Setup And Owners Manual

Main DiSpLay anD FuncTionS

MODE
FUNCTIONS DISPLAY
SUB-DISPLAY
FUNCTION Button
To begin using the computer, simply press the FUNCTION button. Following installation,
the computer is activated automatically by a rotating wheel.
There are 2 power saving modes - 50% savings if no movement after 5 minutes, 100%
power savings after 30 minutes. Press the FuNCTION button to exit the power saving
modes prior to using the computer.
Press the FUNCTION button, to switch the computer through the following functions:
"CLK" – Clock feature, in 12/24 hr format
"TM" – Time ridden for 1 ride
"AVS" – Average speed for 1 ride
"MXS" – Maximum speed for 1 ride
"DST" - Distance ridden for 1 ride
"ODO" – Total miles ridden for all rides
"KCAL" – Calories burned (estimate) for 1 ride
"TM, AVS, MXS, DST and kCAL " are recorded automatically as soon as the wheel moves.
Recording stops if the wheel stops. To clear this information, press and hold the SET
button in the "TM" mode.
GENERAL NOTES FOR PROGRAMMING ALL FUNCTIONS:
• Press and hold SET for 3 seconds to begin programming a function.
• Press SET to change the value of a selected field. Press/hold SET to change value
rapidly.
• Press the FUNCTION button to move the cursor to the next field.
• Press and hold the FUNCTION button for 3 seconds to exit programming.
SETTING THE CLOCK (CLK)
1. Press FUNCTION until the "CLK" function shows.
2. Press and hold SET for >3 seconds to begin programming.
3. Press SET to change to "12H" or "24H" hour mode.
4. Press the FUNCTION to move the cursor to the hour field
5. Press SET hour.
6. Repeat steps 4 and 5 to set Minutes and Seconds.
7. Press and hold the FUNCTION button for 3 seconds to exit programming.
SETTING THE WHEEL SIZE
1. Press FUNCTION until the "ODO" displays.
2. Press and hold SET for >3 seconds to begin programming.
3. Press SET to change to "KM/H" or "M/H"
4. Determine your Tire Size then find the corresponding L (mm) in the chart below.
5. Press FUNCTION to move the cursor to the first field.
6. Press SET to change the 1st digit of 4 numbers for the L (mm).
Repeat steps 5 and 6 until the proper L (mm) is entered.
7. Press and hold FUNCTION for 3 seconds to exit programming.
Tire Size
L (mm)
24 X 1.75
24 X 2.00
24 X 2.125
26 X 7/8
26 X 1(59)
26 X 1(65)
26 X 1.25
Tire Size L (mm) 26 X 1-1/8
14 X 1.50 1020 26 X 1-3/8
14 x 1.75 1055 26 X 1-1/2
16 X 1.50 1185 26 X 1.40
16 X 1.75 1195 26 X 1.50
18 X 1.50 1340 26 X 1.75
18 X 1.75 1350 26 X 1.95
20 X 1.75 1515 26 X 2.00
20 X 1-3/8 1615 26 X 2.10
22 X 1-3/8 1770 26 X 2.125
22 X 1-1/2 1785 26 X 2.35
24 X 1 1753 26 X 3.00
24 X 3/4 Tubular 1785 27 X 1
24 x 1-1/8 1795 27 X 1-1/8
24 X 1-1/4 1905 27 X 1-1/4
CURRENT SPEED
SPEED SCALE
L (mm) Tire Size
1890 27 X 1-3/8
1925 650 X 20C
1965 650 X 23C
1920 650 X 35A
1913 650 X 38A
1952 650 X 38b
1953 700 X 18C
1970 700 X 19C
2068 700 X 20C
2100 700 X 23C
2005 700 X 25C
2010 700 X 28C
2023 700 X 30C
2050 700 X 32C
2055 700C Tubular
2068 700 X 35C
2070 700 X 38C
2083 700 X 40C
2170 29 X 2.1
2145 29 X 2.3
2155
2161
SETTING CALORIES BURNED (KCAL)
This computer can estimate calories burned while riding. The estimate is based on weight,
gender, time ridden and average speed. IMPORTANT: The estimate is truly an estimate.
SET Button
Actual calories burned will vary depending on many variables the computer does not
(back of unit)
calculate such as heart rate.
1. Press FUNCTION until the "KCAL" displays.
2 Press and hold SET for >3 seconds to begin programming.
3. Press SET to select gender "MALE" or "FEMALE".
4. Press FUNCTION to store gender.
5. Press SET to change weight unit "kg" or "Lb".
6. Press FUNCTION to begin entering your weight in unit selected.
7. Press or hold Set to change the weight. Range: 0 ~ 150 kg, 0-330 Lb.
8. Press and hold the Function for 3 seconds to exit programming.
RESETTING THE ODOMETER (ODO)
If the battery is replaced, it is possible to update the odometer to the mileage on your bike
after replacing the battery.
1. Press FUNCTION until the "ODO" displays.
2. Press and hold SET for >3 seconds to begin programming.
3. Press FUNCTION until "00000" (five zeros) and "ODO" appears on the screen
4. Press SET to change the appropriate numbers. Press FUNCTION to change cursor
position.
5. Repeat step 4 until the odometer is set.
6. Press and hold FUNCTION for 3 seconds to exit programming.
BATTERY REPLACEMENT
Remove the computer from the handlebar mount. use a coin to unscrew the battery door.
Turn counter-clockwise. Remove the old battery. Place a new battery (CR2032) into the
computer with the positive "+" marking of the battery facing up. Replace the battery door.
Follow these steps for replacing the sensor battery (CR2032).
IQ200 Specifications
Operating Temperature
Storage Temperature
battery (x2)
Weight
Timer Range: 0~29 (hour): 59 (minute): 59 (second)
Current Speed Range: 0 ~ 99.9 kM/ 0~62 Mile
Average Speed Range: 0 ~ 99.9 kM/ 0~62 Mile
MAX Speed Range: 0 ~ 99.9 kM/ 0 ~ 62 Mile
(Trip) Distance Range: 0 ~ 999.99 kM/ 0~600 Mile
Odometer Range: 0 ~ 99999 kM/ 0 ~ 62000 Mile

TROUBLESHOOTING

CONDITION
Wheel moving but current speed does not
appear
"eRR01" appears on display
Display is blank, very light or black
Display changes slowly
CANNONDALE CONTACT INFORMATION
L (mm)
2169
bedford, Pennsylvania, 15522 , uSA
1938
1944
2090
custserv@cyclingsportsgroup.com
2125
2105
CANNONDALE AUSTRALIA
2070
Cycling Sports Group Australia Pty Limited
2080
2086
Stanmore, NSW 2048, Australia
2096
2105
2136
cannondale@cyclingsportsgroup.com.au
2146
2155
2130
2168
2180
2200
(Voice): +44 (0)1202 732288
2288
2326
sales@cyclingsportsgroup.co.uk
2012 IQ200 Computer
Setup and Owners Manual - 11/11
ACTION
Check/adjust sensor and magnet gap.
battery is low –> replace
battery low –> replace
battery low –> replace.
Computer too hot –> move to cool area.
Computer too cold –> move to warm area
CANNONDALE USA
Cycling Sports Group, Inc.
172 Friendship Road,
(Voice): 1-800-bIke-uSA
(Fax): 814-623-6173
servicedeskeurope@cyclingsportsgroup.com
unit 8, 31-41 bridge Road
(Voice): 61-2-85954444
(Fax): 61-2-85954499
CANNONDALE UK
Cycling Sports Group
Vantage Way, The Fulcrum,
Poole, Dorset, bH12 4Nu
(Fax): +44 (0)1202 723366
0° C ~ 40° C, ( 32° F ~ 104°F)
-10° C ~ 50° C, ( 14° F ~ 122°F)
3 volt lithium, CR2032 cell
30.6 grams
CANNONDALE EUROPE
Cycling Sports Group europe, b.V.
mail: Postbus 5100
visits: Hanzepoort 27
7570 GC, Oldenzaal, Netherlands
(Voice): + 41 61.4879380
(Fax): 31-5415-14240
CANNONDALE JAPAN
Namba Sumiso building 9F,
4-19, Minami Horie 1-chome,
Nishi-ku, Osaka 550-0015, Japan
(Voice): 06-6110-9390
(Fax): 06-6110-9361
cjcustserv@cannondale.com