Table of Contents
Advertisement
KEYS & THEIR FUNCTIONS
SET KEY
SET KEY
• Sets the value being adjusted in the Setting Sequence
•
IQ114 ONLY
Access Sub Modes
•
PRESS & HOLD:
Accesses Setting Modes for Clock &
Odometer in Operating Mode
PRESS & HOLD:
•
Clears all Ride Information to Zero
6
english / deutsch / español / italiano / francais
FUNCTION KEY
MODE KEY
• Adjusts value in the Setting Sequence
• Scrolls through Main Operating modes
•
PRESS & HOLD:
Activates Backlight (
IQ114 ONLY)
SHIPPING MODE, SLEEP MODE & RESET ALL
SHIPPING & SLEEP MODES
SHIPPING MODE:
Your IQ Series Cyclocomputer is comes to your Cannondale dealer in
SHIPPING mode. In this mode, the unit is set to its factory default settings. The center
display line flashes ENGLISH (default language choice). Press either key to enter the
Setting Sequence.
NOTE:
It is possible the unit may arrive not in shipping mode if it has been accidentally activated. this
should not have an adverse impact on the life of the battery. Press & Hold the SET & FUNCTION keys
to enter the Setting Sequence.
SLEEP MODE:
To conserve battery life, when the Cyclocomputer does not receive a signal
for a period of time, the unit goes into SLEEP mode. The display reads Time of Day in the
lower display line. All other display fields are blank. Press any key to wake the unit and
resume Operating mode.
RESET ALL:
To restore the unit back to its factory defaults and reset preferences of the
Cyclocomuter, Press & Hold the SET & FUNCTION keys untill all fields of the display are
activated. the unit will automatically enter the Setting Sequence. All data will be lost.
7
Advertisement
Table of Contents
