Selecting The Automatic Reception Mode (Receive Mode Setting) - Oce OP31C Operation Manual

Section 7 Various Settings and Registration

Selecting the Automatic Reception Mode (Receive Mode setting)

This fax has 2 or 3 automatic reception modes (depending upon the model version). The inch version of this fax offers the Automatic Fax
Reception, Auto FAX/TEL Switching and D.R.D. Reception modes. The metric version contains the Automatic Fax Reception and Auto
FAX/TEL Switching modes. Select from among the available modes that are available for your fax machine.
* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1
Press the Default key. The Default Setting screen will
appear.
2
Press the "Fax default" key.
(inch)
(metric)
3
Press the " " key until "Receive Mode" ["Reception
mode"] is highlighted.
4
Press the "Change #" key.
7-8
5
Select the desired reception mode by pressing either the
"Fax Reception" ["Fax Rx"] key, the "Auto Fax/Tel. SW"
key or the "D.R.D." key, as appropriate.
* The "D.R.D." key will not be displayed in the metric
version of this fax machine.
* If you selected "D.R.D.", go directly to step 7.
(inch)
(metric)
6
If you selected "Fax Reception" or "Auto Fax/Tel. SW",
press the "Close" key. If you are finished making settings,
press the Reset key to return to the initial mode.
7
Select the desired ring pattern.
• Pattern 1: Normal Ring
• Pattern 2: Double Ring
• Pattern 3: S-S-L (Short-Short-Long)
• Pattern 4: S-L-S (Short-Long-Short)
(inch)
8
Press the "Close" key. If you are finished making settings,
press the Reset key to return to the initial mode.