Removing And Attaching The Safety Seat Base; Adjusting The Handle - Graco 6900 Series Owner's Manual

Stroller

Hide thumbs Also See for 6900 Series:

Table of Contents

5.3 Removing and Attaching the Safety Seat Base

1. Squeeze base release handle at back of the safety

seat to release the attachment latch. Lift safety seat

from base as shown

2. To reattach seat, push it down until the safety seat

clicks into base.

3. Pull up on safety seat to be sure it is latched

firmly into base.

The handle can lock into any of three positions

for carrying, reclining, or sitting.

To adjust the handle:

1. Press handle adjustment buttons on both

sides of handle

2. Slowly rotate handle out of its locked

position.

Table of Contents