Utax CDC 1520 Instruction Manual page 103

NOTE: If the scanner default setting for Selec. of senders (users) is set to [On], user number 001
will automatically be selected.
If a password was entered when the user was registered, the password input screen is displayed.
Input the password and press [Enter]. If the password is correct, the scanner settings screen is
displayed.
4 To input a mail address, press [Enter
dest.].
5 Enter the e-mail address for the
destination (recipient). After inputting,
press [End] to display the sending
method screen.
6 Select whether to send as [To:], [CC:], or
[BCC:] and press [Enter].
7 Press [Address Book] to use a private
address book or common address book.
8
Press [Common] ([Common book]) or
[Private] ([Private book]) to display the
destinations stored in the selected
address book. In this example a
destination is selected from the
Common Address Book.
Press [ ] or [ ] to select a destination
and select whether to send as [To:],
[CC:], or [BCC:].
When a destination is selected, an ⌧ is displayed next to it in the Select column to the right of the
Address column.
Ready to scan.
Place the original and select destination.
Send E-mail-Sending
Destination
Enter Address
dest. Book
s
d of receiver.
To:
CC:
BCC:
Ready to scan.
Place the original and select destination.
Send E-mail-Sending
Destination
Enter Address
dest. Book
Address Book
Symbol 0-9 Address
User A
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
Common Private
Basic Operation
( Full-Color )
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size
Delete
Select Scanning
Send Size Resolution
Basic
Quality
Stop
Char.Limit:64 letters including #
Back
Space
Back
Enter
( Full-Color )
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size
Delete
Select Scanning
Send Size Resolution
Basic
Quality
Select: 1.
Up
Down
Original
11×8½"
08/08
200dpi
End
Del.
Stop
Original
11×8½"
08/08
200dpi
3-21