iGenix IG1190 Instructions For Use Manual page 7

Using your Multi Chef
Opening and Closing the Multi Chef:
How to install the round wire rack:
Note: To install the paddle, reverse the sequence above.
How to remove the bowl from the Multi-cooker:
1. Open the lid and place the Baking Tray or Stir Paddle into the bowl before putting any food
into the unit. When putting in the food into the bowl, keep it 15-20mm from the edge of the
bowl to allow for maximum hot air circulation.
2. Close the lid of the multi-cooker, making sure that no food is touching the lid.
3. Plug the unit in power socket and switch on.
4. Press the 'Power On' button once.
5. Press the TIME button and the use the + and – buttons to set your desired cooking time.
Press and hold the + and – buttons to change the time in 10 minute increments.
6. Repeat step 5 but this time pressing the TEMP button.
Note: The cooker will switch on as soon as the temperature and cooking time has been set.
7. When the cooker has run for the set time it will automatically switch off and an alarm will
sound to tell you.
7