Table of Contents
Advertisement
Smart Wireless Navigator
May 2014
Table 1-1. User accounts and passwords
Default username
Supervisor
User 1
User 2
User 3
1.4.2
AMS
account. AMS Wireless Configurator has a default username/password of admin/[no password].
When commissioning the AMS Wireless Configurator within the Navigator, it is strongly
recommended, for security purposes, to change the password. Follow best practices and
site/corporate IT policies to create a strong, non-default password. The username and password
of AMS Device Manager will match the username/password of the main AMS system.
1.4.3
Server Plus Connect for AMS Device Manager
Client-Server operation) displays on the Client SC Station when AMS Device Manager is started.
To connect to a different Server Plus Station if AMS Device Manager is closed on the Client SC
Station:
1.
2.
3.
4.
5.
To connect to a different Server Plus Station if AMS Device Manager is running on the Client SC
Station:
1.
2.
3.
4.
After the Server Plus connection has been established, you can view the entire network
configuration of the Server Plus in the Device Explorer view on the Client SC.
6
Default password
Admin
Password1
Password2
Password3
To protect the Navigator information and programs when not in use, or to switch
users, click the "log out" button in the Title Bar.
™
Wireless Configurator or AMS Device Manager
Launching the design sub-menu and selecting the Device Design button with open
AMS Wireless Configurator or AMS Device Manager, depending on your Navigator
type. A prompt will ask for the username and password associated with this AMS
To connect to a different Server Plus Station, the Client SC Station must first be added
to the Station Configuration of the Server Plus Station (see Related Topics for more
information). If this requirement is not met, an error (This PC is not licensed for
In Network Configuration on the Client SC Station, remove all configured system
interfaces (other than HART
Select Start | All Programs | AMS Device Manager | Server Plus Connect.
Select the desired Server Plus Station PC from the Server Plus Station drop-down list or
enter the PC name in the box and click Connect.
Click Yes to launch AMS Device Manager after making the connection; No to connect
without launching AMS Device Manager; or Cancel to keep the existing connection.
After the connection is made, click Close.
If no system interfaces (other than HART Modem) are configured on the Client SC
Station, select Tools | Server Plus Connect.
Select the desired Server Plus Station PC from the Server Plus Station drop-down list or
enter the PC name in the box and click Connect.
Click Yes to launch AMS Device Manager after making the connection, No to connect
without launching AMS Device Manager, or Cancel to keep the existing connection.
After the connection is made, click Close.
Account type
Administrative
General User
General User
General User
®
Modem).
Reference Manual
00809-0100-4423, Rev AB
Restrictions
None, Full Access
Add new Gateways, Settings
(General, Application,
Maintenance)
Smart Wireless Navigator
Advertisement
Table of Contents
