Emerson Smart Wireless Navigator Reference Manual page 17

Reference Manual
00809-0100-4423, Rev AB
1.9.2 All Alerts Report
The Device Alerts contain information that a device malfunction has occurred and needs further
investigation in an asset management system. To do this, open the design sub-menu and launch
the asset management system application (AMS Configurator or AMS Device Manager).
Opening the DD for the device will provide an overview dashboard of the device. Click on
'Investigate' in the upper right-hand corner to understand all active alerts and recommended
actions.
Note
The Device Alerts only contain information on device malfunctions, where the HART status is
Bad and the device likely is not communicating accurate information or has been broken.
The Power Module Alerts in the All Alerts report contains the same information as the Power
Module Alerts report.
The Communication Alerts contain communication alerts, such as deviations from network
design best practices and communication failures.
Note
The network design best practice alerts can be disabled by logging into an Administrator
account and accessing the Settings page.
1.9.3 Navigator maintenance
date for the Navigator Configuration.
The Save Configuration function will save all Navigator customizations in preparation for a
software update. Network and general configuration preferences are saved, to be loaded after
the Navigator software update is complete. Navigator reports the date this configuration was
last saved.
The Load Configuration function will load a previously saved configuration of the Smart Wireless
Navigator. This includes network and general configuration preferences. Choose from multiple
saved configurations.
Figure 1-15. Load configuration function
Smart Wireless Navigator
The All Alerts Report contains device alerts, Power Module alerts, and communication
alerts. Easily locate the device with both the Gateway tag and the device tag.
Immediately understand priority with clear status information.
The Smart Wireless Navigator supports future updates. If at any time Navigator
requires an update, the Settings Display Field provides functions to both save and load
back up configurations for the Navigator. At any time, you can reference the last save
Smart Wireless Navigator
May 2014
17