Baby Lock BLSO-BF2 Installation Manual page 8

• To change the entered information, click Back.
Note
• In order to obtain the Certification Key, a connection
to the Internet must be established.
→ Connect to the certifying server, and then obtain the
upgrade Certification Key.
If the following error message appears
• Verify that the CD key and internal machine
identification number (No.) have been entered
correctly, and then repeat the procedure from step
c
. To close the message, click OK.
• The CD Key is valid for use with only one
designated internal machine identification number
(No.).
Check that the CD key has been entered correctly,
and then repeat the procedure from step
close the message, click OK.
• Check the Internet connection, and then click
Certify again. To close the message, click OK.
6
j
Write down the 8-digit Certification Key that
appears.
Note
• After upgrading the sewing machine to KIT
Certification Key must be entered in the sewing
machine Settings screen.
c
. To
k
Click Finish.
If the latest program has already been
installed in the machine
Skip the steps
procedure from step
l
While pressing the "Automatic Threading"
button, turn the sewing machine on.
Use USB media or a computer to install the upgrade
application for KIT
USB media
If
follow.
computer
If a
l q
to , and then start the
r
.
III on the sewing machine.
is to be used, refer to the instructions that
is to be used, refer to page 8.
III , the