Final Installation; The Controls - Russell Hobbs RHCTD1 Instrucion Manual

FINAL INSTALLATION

Push the filter into its operating position as shown in
the diagram. If you wish to change the side on which
your door opens, see the instructions on the back
page. Remove any dust by wiping the drum and door
with a damp cloth. Any initial smell of burning will
be caused by dust on the heater and will quickly
disappear.

THE CONTROLS

A. PROGRAMME SELECTOR: Turn the programme selector to the desired level of dryness. You
have various degrees of dryness as well as a timed option and an airing cycle.
B. START BUTTON: To start the drying cycle.
C. HI/LO HEAT BUTTON: High heat for cotton and linen fabrics and low heat for synthetic or delicate
fabrics.
D. BOTTLE FULL LIGHT: This will light up and the machine will stop if the water bottle is full or if it
has not been pushed fully back into the correct position.
E. THE WATER BOTTLE: (Behind the pull-down door): Must be emptied after every cycle (except
when a drain hose kit is fitted).
F. ANTI-CREASE ACTIVE NEON: When lit constantly, the neon indicates that the drying cycle is
completed and clothes can be removed. To reduce creasing of clothes, anti-crease will automatically start
once the drying cycle is complete.