Changing the unit's settings
Home Network ( DLNA ) Server Settings
You can set the DLNA (Server) function (
Network Settings
Home Network ( DLNA ) Server Settings
Home Network ( DLNA ) Server Settings
Home Network ( DLNA ) Server function
Setting device name
Registration type for remote devices
Remote device list
Home Network ( DLNA ) Server
function
You can switch between enable/disable of the DLNA
(Server) function.
≥If "On" is selected, "Power Save in Standby" is
fixed to "Off". (
Setting device name
It is also possible to change the name of this unit on
the network.
≥Select from a preset list
Select the preset name, then press [OK].
≥Create name
Enter the name. (
Registration type for remote devices
Automatic
Manual
88
VQT3C14
74)
89)
70, Entering text)
All connected devices on the same
network can access this unit.
Only registered devices can
access this unit.
Remote device list
≥This function cannot be enabled when "Manual" is
selected in "Registration type for remote devices".
(
left)
≥To register equipment manually
1 Select the device name or the MAC Address for
the device you want to register, then press
[OK].
2 Select "Yes", then press [OK].
≥To deregister equipment
1 Select the registered equipment, then press
[OK].
2 Select "Yes", then press [OK].
≥ The maximum number of equipment that can be registered is
16.