∫ When the Download from TV screen appears
The setting information on the TV is acquired by
this unit.
After tuning has been completed, clock will be set
automatically.
If the clock setting screen appears, set the time
manually (
90, Clock).
3
Set “Power Save” to “On”, “On Timer”
or “Off”, then press [OK].
Power Save in Standby
Power Save
On
From
To
12
AM
6
AM
On
It will go into the Power Save in Standby
mode.
On Timer Set the start and stop time and then
press [OK].
≥“Power Save in Standby” is activated
when the set time comes.
Off
It is possible to start quickly from the
standby mode. (Quick Start mode)
≥If you use Home Network ( DLNA )
Server function (
88), select “Off”.
This function is not available with other
settings.
≥Power consumption is lowered additionally when
“RF OUT ( Aerial Signal )” is set to “Off”. (
89)
When “Easy Setting has been completed.” appears,
Easy Setting is complete.
To stop partway
Press [RETURN
].
To restart set up
1 Press [SETUP].
2 Select “Auto Setup” in “Digital TV Tuning”, then press
[OK].
If the TV aspect setting screen appears (
85, TV
Aspect)
To confirm that channels have been tuned correctly
(
24, Using Channel List)
Page 20