Switching Off; Unloading The Dishwasher; Interrupting A Programme - Miele Dishwasher Operating Instructions Manual

Operation

Switching off

At the end of a programme:
^ Switch the dishwasher off with the K
sensor.
The dishwasher will continue to use
energy until you switch it off with the
K sensor.
The dishwasher will switch off
automatically a few minutes after the
end of the programme.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the stopcock should
be closed.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
44

Interrupting a programme

A programme is interrupted as soon as
the door is opened.
If the door is closed again, the
programme will continue from the point
it was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then raise the door
up and push until the catch
engages.