Crossover Adjustments - Soundstream Tarantula Limited Edition Owner's Manual And Installation Manual

Tarantula
The amplifier incorporates two separate electronic crossovers. A 12
over, with full range RCA outputs to drive an external amplifier. No external elec-
tronic crossover is required when operating this amplifier.
The Subsonic filter allows the amplifier to focus all of its energy where it is needed
most. Adjust the filter to the tuning frequency of a ported box and increases in
output will be noticed immediately. The Subsonic filter is variable from 13 to 30 Hz.
The shaded area below shows the frequency and range adjustments as they ap-
pear on the control panel of the amplifier.
The Low Pass filter is variable from 35 to 500 Hz, which is divided into two separate
ranges: "Low" and "High". The "Low" range will yield a frequency range from 35 to
135 Hz, while the "High" is from 135 to 500 Hz.
The shaded area below shows the frequency and range adjustments as they ap-
pear on the control panel of the amplifier.
Subsonic
Low Pass
11