Related Manuals for Campbell AM-ENC Analog Multiplexer Enclosure
Summary of Contents for Campbell AM-ENC Analog Multiplexer Enclosure
- Page 1 AM-ENC ANALOG MULTIPLEXER ENCLOSURE OPERATOR’S MANUAL REVISION: 12/91 COPYRIGHT (c) 1989, 1991 CAMPBELL SCIENTIFIC, INC.
- Page 2 This is a blank page.
-
Page 3: Warranty And Assistance
WARRANTY AND ASSISTANCE The AM-ENC Analog Multiplexer Enclosure is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless specified otherwise. Batteries have no warranty. CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited to repairing or replacing (at CAMPBELL SCIENTIFIC,... - Page 4 This is a blank page.
- Page 5 AM-ENC ANALOG MULTIPLEXER ENCLOSURE The AM-ENC protects multiplexer from 1. DESCRIPTION windblown dust, rain, and sleet. The AM-ENC (Analog Multiplexer ENClosure) consists of a white fiberglass box, external The AM-ENC is not recommended for use with mounting brackets with U-bolts, conduit thermocouples.
-
Page 6: Specifications
AM-ENC ANALOG MULTIPLEXER ENCLOSURE 3. Remove and dispose of the four rubber feet 2. SPECIFICATIONS from the back panel of the AM416. Dimensions: External: 11.3" W x 13.5" L x 5.56" D 4. Align the two holes through the back panel Internal: 10.0"... - Page 7 AM-ENC ANALOG MULTIPLEXER ENCLOSURE The slip-in reducing plug has a smaller external NOTE: Because lead-acid batteries may orifice that restricts air movement. The emit explosive hydrogen gas, DO NOT seal reducing plugs may be removed to an enclosure containing lead-acid batteries.
- Page 8 This is a blank page.