Related Manuals for Campbell AM-ENCT
Summary of Contents for Campbell AM-ENCT
- Page 1 AM-ENCT Analog Multiplexer Enclosure Revision: 12/91 C o p y r i g h t ( c ) 1 9 8 9 - 1 9 9 1 C a m p b e l l S c i e n t i f i c ,...
-
Page 2: Warranty And Assistance
Warranty and Assistance The AM-ENCT ANALOG MULTIPLEXER ENCLOSURE is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless specified otherwise. Batteries have no warranty. CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited to repairing or... - Page 3 AM416 or AM32 multiplexer, the multiplexer junctions and reference temperature multiplexer is mounted in the AM-ENCT at the error. factory. If the AM-ENCT and multiplexer are FIGURE 1. The AM-ENCT Enclosure Showing Internal Aluminum Plates and Insulation (Cross- Hatched)
-
Page 4: Specifications
Tools required: flat-bladed screwdriver the enclosure will contain a small plastic bag with the following parts: 1. Assembly of the AM32 and AM-ENCT is the same as the AM416 except that (4) 3/8" screws disassembly of the multiplexer is not (4) #6 washers required. - Page 5 Sensor, datalogger, and battery cables that enter the AM-ENCT should be strain-relieved. Desiccant should be used inside the AM-ENCT The AM416 contains a flange to tie the wires to to help reduce water vapor. Desiccant should for strain relief.
- Page 6 AM-ENCT ANALOG MULTIPLEXER ENCLOSURE FIGURE 2. Thermocouple Lead Wire Routing...
- Page 7 This is a blank page.
-
Page 8: Campbell Scientific Companies
Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com info@campbellsci.com Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za sales@csafrica.co.za Campbell Scientific Australia Pty. Ltd. (CSA)