Manual Tune:
1. Press
, and then press
2. Press
or
to step between the channels and press
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a tuning
meter with the signal strength and the multiplex name after a few seconds.
3. Press
or
repeatedly to exit this order.
Prune Invalid:
1. Press
, and then press
to select „YES‟, and then press
2. Press
or
or
to select < Manual tune >, press
or
to < Prune invalid >, press
to confirm. This will remove all invalid stations.
22
to confirm.
to select the current channel.
to confirm.