Download Print this page

Kenwood KVT-827DVD Installation Manual page 9

Monitor with dvd receiver
Hide thumbs Also See for KVT-827DVD:

Advertisement

Installation for Monitor Unit
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Make sure that the unit is installed securely in place. If the unit is unstable,
it may malfunction (eg, the sound may skip).
Installation for Receiver unit
1. Attach the installation brackets 0 to the sides of the
hideaway unit using the sems bolts 8.
2. Use the tapping screw 9 to secure the hideaway unit
to the audio board.
Firewall or metal support
Metal mounting strap
(commercially available)
Sems bolts (M4 × 8 mm)
(Accessory 8)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Accessory 6
Installation brackets
(Accessory 0)
Tapping screw (ø4 × 16 mm)
(Accessory 9)
9
|
English

Advertisement

loading

This manual is also suitable for:

Kvt-727dvdKvt-627dvd