Advertisement
Operating your Convector Heater
TIMER
The heater will always be on when the slide
switch is in the "I" position.
The heater will always be off when the slide
switch is in the "O" position.
To set the Timer; set the MODE switch to the
Timer position.
(This function can only be used once a heat level
has been selected ; see thermostat section).
You must set the time prior to programming the
Timer. To do this; turn the outer dial of the timer
in a clockwise direction until the time of the day
(24-hour clock) corresponds with the triangular
marking. Example if it is 2pm (1400 hours) then
set the triangular mark in line with 14. One
complete turn of the dial corresponds to 24 hours.
There are 96 "riders", positioned around the dial,
each rider represents 15 minutes.
Where all the "riders" are pushed to the outside of
the timer the heater will be ON continuously.
To set a specific time for example:
If you want the heater to be on from 6pm to
10pm, then set all the riders from 18 to 22 (1800
hours to 2200 hours) to the outside of the rim and
all other riders to the inside of the timer. The unit
will then turn on automatically at 6pm and off
again at 10pm.
WARNING! Take care in positioning your heater,
using the timer will mean the heater will come on
automatically. Fire may result if placed next to
combustible material.
Mode Switch
CLEANING YOUR HEATER
The heater requires regular cleaning to ensure
trouble free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff
from around the grills.
Never use solutions such as benzene, thinners or
polishing agents.
Ensure the heater is dry before plugging back into
the mains supply.
Do not attempt to dismantle the heater. There are
no user serviceable parts. For service or repair,
contact an authorised electrical service
technician.
CAUTION This heater generates heat during use.
Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to
persons
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase.
Indicates actual
current time
"ON" button
"TIMER" button
"OFF" button
Advertisement
