Download Print this page

Goldair GCV330 Operating Instructions page 3

Convector heater with fan and timer

Advertisement

Operating your Convector Heater
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
WARNING Keep all objects at least 1 metre
from the front, sides and rear of the appliance.
PLEASE NOTE: As this product is fitted with a
Timer, the Timer has been set to the "ON"
position. Please refer to the Timer section for
setting instructions.
ASSEMBLING YOUR HEATER
Before using the heater the feet (supplied
separately in the carton), must be fitted to the
unit. These are to be attached to the base of the
heater by placing the lugs on the feet in the
bottom ends of the heater side mouldings. The
screw pack to attach the feet to your heater will
be taped to either one of the feet for your heater,
or taped to the plug head.
HEAT CONTROL SWITCH
The control switch positions are:
I+
- Low Heat with fan
II+
- High Heat with fan
0 –Off
I - Low Heat
II - High Heat
Check that the heat control switch is set to Off
position before plugging the heater into the mains
supply. For greater economy, use the High Heat
setting initially and then switch to the Low Heat
setting.
THERMOSTAT
Turn the thermostat knob clockwise until you
reach
the
graduated scale.
temperature is reached, slowly turn the knob anti-
clockwise until the heater turns off (you will hear a
click). The heater will now cycle on and off to
maintain the set temperature.
SAFETY DEVICE
This appliance has two protection devices:
The first device automatically disconnects &
reconnects the appliance at a pre-set
temperature.
The second safety device disconnects the
appliance permanently in case of overheating, by
means of a thermal fuse (it is non resettable).
IMPORTANT! NEVER COVER THIS HEATER
Do not use this heater with a programmer,
remote-control system, separate timer or any
other device that switches the heater on
automatically.
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
maximum
temperature
When the desired room
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
info@cdbgoldair.com.au
on
the

Advertisement

loading