Page 2
General Care and Safety Guide Thank you for choosing a Goldair Convector Heater. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this booklet, will give you years of useful service. Please read these instructions carefully and keep for future reference.
Page 3
Components ASSEMBLY Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. The screw pack to attach the feet to your heater will be taped to either one of the feet for your heater, or taped to the plug.
Operating your Appliance Always choose a safe location for the appliance, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance. WARNING: THIS IS A DOUBLE SIDED HEATER.
Operating your Appliance THERMOSTAT Selected your desired temperature by pressing either button “16” to increase temperature up to 32 °C or button “17” to decrease temperature down to 16 °C. The selected temperature will be displayed on the control panel. measurement 14 is shown in the display 5. After a few seconds the display will change back to showing the current room temperature but the set temperature will be stored and the heater will continue to run until that temperature is reached.
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
Need help?
Do you have a question about the GCV370 and is the answer not in the manual?
Questions and answers