ActionTec ScreenBeam Pro SBWD100A EDU User Manual page 43

Screen mirroring
s
AllShareCast (Samsung devices only)
s
Cast screen
s
See the ScreenBeam Pro compatibility page for recommended Miracast
devices.
Do I need to install drivers/apps to use the ScreenBeam Pro Receiver?
For Windows 7/8, you may need to install the Intel WiDi (3.5 or higher)
s
application.
For Windows 8.1, you only need to install the latest Windows updates.
s
For Android 4.2 or higher, no app is required.
s
Note: Your device must be Intel® WiDi-compatible or Wi-Fi Miracast™-
capable.
How can I improve my video/audio performance?
You can try the following methods to improve the ScreenBeam Pro's video/
audio performance:
Place your device closer to ScreenBeam Pro.
s
Connect your device to a wireless network that is using a cleaner wireless
s
channel or change the wireless channel on the current wireless network,
and then connect the device to ScreenBeam Pro.
Turn off the Wi-Fi devices that are not in use currently.
s
What wireless signal range can I expect with ScreenBeam Pro?
ScreenBeam Pro is designed to be used in the same room with the source
device. For best performance, the source device should be placed within 20
meters of ScreenBeam Pro.
Do I need an existing wireless network to use ScreenBeam Pro?
No. ScreenBeam Pro connects directly with the Intel WiDi or Miracast™-
enabled device, and no wireless network is needed. However, the source
device needs to be connected to an Internet router or data network to view
Troubleshooting
41