ActionTec ScreenBeam Pro SBWD100A EDU User Manual page 29

2. Click Apply, then click OK in the pop-up window.
The language has been changed.
Setting Up PIN Pairing
1. Click Features from any web server screen, and set the "Force PIN Pairing
on First Connection" feature to On or Off.
On - Select "On" to enable the PIN enforcement function. In this case, you
must enter a PIN code on the device connecting to ScreenBeam Pro for the
first time. When this function is enabled, the system provides two PIN gen-
eration methods: Random and Static.
Random causes a randomly generated PIN to be created by ScreenBeam
Pro, which will be displayed on the HDTV or projector screen.
Static allows the user to create a custom PIN. Enter the seven digits in the
"Static" text box, then click Apply. ScreenBeam Pro creates an eight-digit
PIN and displays it in the "Static PIN" text box. This PIN will not be dis-
played on any connected display.
Off - Select "Off " to disable the PIN enforcement function. PIN entry or
PBC is used when connecting your device to the receiver for the first time.
Note: Some source devices may not support PIN entry and may not be
able to connect with ScreenBeam Pro if this mode is enabled. Refer to the
device's user manual for detail about enabling the PIN connection.
Advanced Settings
27