Panasonic SC-VKX80 Operating Instructions Manual page 13

The type of disc and the disc format can cause some items
to not show or work.
Menu 1 (Disc/Play)
TRACK SEARCH, TITLE SEARCH, CONTENT SEARCH,
CHAPTER SEARCH, PG SEARCH (program search),
PL SEARCH (playlist search)
Start playback from a specified item
This function does not work when you play a disc with the
playback control (PBC) function.
Example: : T2 C5
To select numbers for data disc
Example: 12: [ 10] → [1] → [2] → [OK]
AUDIO
(with multiple soundtrack)
Select audio soundtrack
Select "L", "R", "L+R" or "L R"
Signal type/data
LPCM/PPCM/GD/DTS/MP3/MPEG:
Signal type kHz (sampling frequency)/bit/ch (number of channels)
Example: 3/ 2 .1ch
.1: Low frequency effect
(not shown if there is no signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
1: Centre
2: Front left + Front right
3: Front left + Front right + Centre
It can be a while before playback starts if you change the
audio of a DivX disc.
PLAY SPEED
Change play speed
– from "x0.6" to "x1.4" (in 0.1-unit step)
• Press [ 4 , DVD/CD] to continue normal playback.
• After you change the speed:
– Audio output will switch to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 48 kHz.
REPEAT MODE
( Z 11, Repeat playback)
A-B Repeat: Repeat a specified section
Except
(SVCD only)
Press [OK] at the start and end points.
• To cancel, select "OFF".
SUBTITLE
(with multiple subtitles)
Select subtitle language
• For +R/+RW disc, a number display will replace the subtitles that
cannot be shown.
(with subtitle on or off information)
ON ↔ OFF
ANGLE
(with multiple angles)
Select a video angle
DATE DISPLAY
Show the date of a picture
ON ↔ OFF
VKX80_GC_1En.indd 13 VKX80_GC_1En.indd 13
Rotate a picture (during pause)
Menu 2 (Video)
NORMAL:
CINEMA1:
CINEMA2:
DYNAMIC:
ANIMATION: Suitable for animation.
Select zoom sizes
NORMAL, AUTO (
If you have set "VIDEO OUT (I/P)" to "PROGRESSIVE" ( Z 20,
"VIDEO" menu), set the method of conversion for progressive output
accordingly:
When playing PAL discs
AUTO: Converts the film and video automatically.
VIDEO: Select when the content is distorted in the "AUTO" mode.
FILM:
When playing NTSC discs
AUTO1: Converts the film and video automatically.
AUTO2: Select to automatically sense the differences in the frame
VIDEO: Select when the video content is distorted in the "AUTO1" or
AUTO:
INTERLACE:
PROGRESSIVE: Select if the DivX content was encoded in
Menu 3 (Audio)
(still picture part)
Make the dialogue in films easier to hear
recorded in the centre channel)
(SVCD only)
in the centre channel)
ON ↔ OFF
Select the sound quality
Menu 4 (Karaoke)
( Z 18, "Enjoying Karaoke")
ON ↔ OFF
• "PLAY SPEED" ( Z left) does not work in Karaoke mode.
ROTATION
0 ↔ 90 ↔ 180 ↔ 270
PICTURE MODE
Normal images.
Mellows images and enhances details in dark scenes.
Sharpens images and enhances details in dark scenes.
Enhances the contrast for powerful images.
ZOOM
(during pause)
TRANSFER MODE
Select when the edges of the film content
are jagged or rough in the "AUTO" mode.
But, if the video content is distorted
(as illustrated on the right), then select
"AUTO".
rates of the film content and converts it accordingly.
"AUTO2" mode.
SOURCE SELECT
Converts the DivX content automatically.
Select if the DivX content was encoded in interlace
format.
progressive format.
DIALOGUE ENHANCER
(Dolby Digital, DTS, 3-channel or higher, with the dialogue
(Dolby Digital, 3-channel or higher, with the dialogue recorded
RE-MASTER
OFF → 1 → 2 → 3
KARAOKE MODE
), x2, x4
13
13
9/22/2010 2:34:43 PM 9/22/2010 2:34:43 PM