Securing A Child Restraint In A Rear Seat Position - GMC Sierra Denali 2006 Owner's Manual

Securing a Child Restraint in a Rear
Seat Position
There is limited space in the rear seating area. If you
want to secure a child restraint in a rear outboard
seating position, be sure to study the instructions that
came with your child restraint to see if there is enough
room to secure your seat properly.
If your child restraint is equipped with the LATCH
system, see Lower Anchors and Tethers for Children
(LATCH) on page 1-38.
If your child restraint does not have the LATCH system,
you will be using the lap-shoulder belt to secure the
child restraint in this position. Be sure to follow the
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle's safety belt through or
around the restraint. The child restraint instructions
will show you how.
1-44
3. Buckle the belt. Make sure the release button is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.