Related Manuals for Global 240878
Summary of Contents for Global 240878
- Page 1 Model 240878 Electronic Weighing/Counting Scale with RS232 Option USER’S GUIDE globalindustrial.com globalindustrial.com 11 Harbor Park Drive Port Washington, NY 11050...
- Page 2 3. RS232 Interface: • Frame Format: Scale has a standard RS232 UART signal. Each data frame Table of Contents has 10 bits. The detail information of frame is as follows: a. Bit 1: Start bit b. Bit 2-Bit 9: Data bit c.
- Page 3 III. OPERATION 2. Counting Mode 1. Press [Set] to sample weight in Counting mode. Display shows “SAP X” (X 1. Scale must be placed on a flat, stable surface. Adjust leveling feet to is the sample number). Press [▲] to choose sample numbers from 10, 20, balance out the leveling indicator, located on rear.
- Page 4 V. ALARM INDICATION/ERROR MESSAGE Read this manual carefully before operation 1. If the weight is over 100% FS+9d, display shows “OF” with a continuous alarm. If the ADC overflows, the display shows “ADC” with a continuous alarm. I. SPECIFICATIONS • Weight must be taken off the platform. 2.