Timer Setting - Panasonic SC-PM50D Operating Instructions Manual

Timer setting

Set the on and off times, desired playback source.
Operation will start with the selected playback
source at the on time. The power will be switched
off at the off time.
- Make absolutely sure that the clock is
set to the correct time before setting the
timer.
1. In the standby mode.
Remote control
SLEEP/
TIMER
0
Press and hold for 2 seconds.
The "ON TIME" blinks and the unit goes to the
timer on setting mode.
2. Set the hours of the on time.
Remote control
f
e
SLEEP/
TIMER
0
3. Set the minutes of the on time.
Remote control
f
e
SLEEP/
TIMER
0
Timer on time setting is completed.
The "OFF TIME" blinks and the unit goes to
the timer off setting mode.
4. Repeat steps 2-3 to set the hours
and minutes of the off time.
After step 3, "SOURCE" blinks, the unit enters
SOURCE setting mode.
5. Set the source to be played back.
Remote control
f e
- DISC/USB/FM can be set as source to be
played back.
- When selecting FM as the source to be
played back, press the e or f button to
select preset station.
SLEEP/
TIMER
0
Source setting is completed.
Whole timer setting is completed.
6. Turn on the Timer Setting.
Remote control
SLEEP/
TIMER
0
- As soon as the " 0 " lights on the display, the
timer will function every day.
- The power will be turned on at the on time,
the " 0 " remains blinking.
In power on mode, the " 0 " starts blink at the
-
on time, the original playback source doesn't
change. The power will be switched off at the
off time.
- The timer operation will not function if a power
failure occurs.
- When selecting DISC/USB as the source to
be played back, if no disc is inserted or no
USB device is connected, the source will skip
to FM station automatically.
- When the playback starts at the on time the
volume level is 12.
(Continued on next page)
" 0 " appears.
21
VQT4L45