Stop Playback - Panasonic SC-PM50D Operating Instructions Manual

Program playback (maximum 16 items)
VCD CD
MP3
1. To show program setting picture
In stop mode press the PROG./ANGLE button.
Remote control
PROG./
ANGLE
2. Select program number.
Press the o , p , a or b button to select desired
program number.
Remote control
To TV
_ _ _ _ _ _ _ _
1 5
_ _ _ _ _ _ _ _
2
6
_ _ _ _ _ _ _ _
3
7
_ _ _ _ _ _ _ _
8
4
PROGRAM
To main unit
PROG.
When pressing the b or a button on the remote
control, the program number on the main unit's
display may be skipped (Example:1
dance with the number sequence of TV display.
3. Enter a track number.
Remote control
_ _ _ _ _ _ _ _
9 13
_ _ _ _ _ _ _ _
10
14
_ _ _ _ _ _ _ _
11 15
_ _ _ _ _ _ _ _
12
16
PLAY CLEAR
During program play-
back setting "PROG."
appears.
v
5) in accor-
4. Repeat steps 2-3 to program your
desired track.
5. Press the i button.
Main unit
Remote control
Program playback starts following the programmed
track number order.
If some program track numbers have not been
set, the playback will skip them.

6. Stop playback.

Press the n button once.
Main unit
To cancel program playback, press the n
-
button in stop mode.
- The same track can be programmed more
than once.
- The numeric button cannot be used to select
the track during program playback.
- During program playback you can press the
PLAY MODE button to select single track or all
programmed tracks and play repeatedly. (Refer
to page16).
Remote control
VQT4L45
15